Capnograph, Draeger Vamos
Capnograph, Draeger Vamos
Description
Manufactured in 2012.
Reworked & calibrated in repair shop.
Measuring sensor new!
Water lock new.
Sample tube included.
Power supply included.
Complete documentation (like instructions for use) available, if needed.
The Drager Vamos is a variable anesthetic gas monitor used for measuring and monitoring the CO2 concentration, functional oxygen saturation, pulse rate, and the concentrations of N2O, and the following volatile anesthetic agents: Halothane, Enflurane, Isoflurane, Sevoflurane, and Desflurane. The display on the Drager Vamos shows Real-time curve CO2, Inspiratory concentration FiCO2, End-Expiratory concentration FetCO2, Functional oxygen saturation SpO2, Pulse rate, Inspiratory concentration FiN2O, End-expiratory concentration FetN2O, and the concentrations of anesthetic agents.
- Inferred light measurement from sidestream samples.
- Measured Parameters: CO2, N2O, SpO2, and 5 anesthetic agents.
- Gas measurement: breath to breath resolution.
- High-contrast amber electroluminescent display.
- 5” diagonal display.
CO2
- Sidestream Sample Flow Rate: 150 mL/min ±20 mL/min
- Measuring Range: 0 to 10.0 vol.% / kPa, 0 to 75 mmHg
- Prevision: ±0.5% Vol.% / kPa or ± 12 % rel. which ever is greater; ±4 mmHg or ±12% rel., whichever is greater
- Resolution: 1 mmHg / 0.1 Vol.% / 0.1 kPa
Anesthetic Gas Measurement
- Sidestream Samle Flow Rate: 150 mL/min ±20 mL/min
- Response Time: <500 ms
- Display Range for N2O: 0 to 99% vol.%
- Display Range for Halothane: 0 to 8.5 vol.%
- Display Range for Isoflurane: 0 to 8.5 vol.%
- Display Range for Enflurane: 0 to 10 vol.%
- Display range for Sevoflurane: 0 to 10 vol.%
- Display Range for Desflurane: 0 to 22 vol.%
- Warm-up Phase: 4 minutes
SpO2
- Oxygen Saturation SpO2: 1 to 100%
- Resolution: 1%
- Pulse Rate: 20 to 250/min
- Resolution: 1/min
Interfaces
- RS 232 C
- MEDIBUS RS 232 C
How do you want to proceed?
How do you want to proceed?
Description
Manufactured in 2012.
Reworked & calibrated in repair shop.
Measuring sensor new!
Water lock new.
Sample tube included.
Power supply included.
Complete documentation (like instructions for use) available, if needed.
The Drager Vamos is a variable anesthetic gas monitor used for measuring and monitoring the CO2 concentration, functional oxygen saturation, pulse rate, and the concentrations of N2O, and the following volatile anesthetic agents: Halothane, Enflurane, Isoflurane, Sevoflurane, and Desflurane. The display on the Drager Vamos shows Real-time curve CO2, Inspiratory concentration FiCO2, End-Expiratory concentration FetCO2, Functional oxygen saturation SpO2, Pulse rate, Inspiratory concentration FiN2O, End-expiratory concentration FetN2O, and the concentrations of anesthetic agents.
- Inferred light measurement from sidestream samples.
- Measured Parameters: CO2, N2O, SpO2, and 5 anesthetic agents.
- Gas measurement: breath to breath resolution.
- High-contrast amber electroluminescent display.
- 5” diagonal display.
CO2
- Sidestream Sample Flow Rate: 150 mL/min ±20 mL/min
- Measuring Range: 0 to 10.0 vol.% / kPa, 0 to 75 mmHg
- Prevision: ±0.5% Vol.% / kPa or ± 12 % rel. which ever is greater; ±4 mmHg or ±12% rel., whichever is greater
- Resolution: 1 mmHg / 0.1 Vol.% / 0.1 kPa
Anesthetic Gas Measurement
- Sidestream Samle Flow Rate: 150 mL/min ±20 mL/min
- Response Time: <500 ms
- Display Range for N2O: 0 to 99% vol.%
- Display Range for Halothane: 0 to 8.5 vol.%
- Display Range for Isoflurane: 0 to 8.5 vol.%
- Display Range for Enflurane: 0 to 10 vol.%
- Display range for Sevoflurane: 0 to 10 vol.%
- Display Range for Desflurane: 0 to 22 vol.%
- Warm-up Phase: 4 minutes
SpO2
- Oxygen Saturation SpO2: 1 to 100%
- Resolution: 1%
- Pulse Rate: 20 to 250/min
- Resolution: 1/min
Interfaces
- RS 232 C
- MEDIBUS RS 232 C
Have a question? Ask the seller!
Your message
Log in to send a message.
How do you want to proceed?
How do you want to proceed?
